-
HAROLBIO
Description
Metalworking goes green
“A better performance respecting the worker and the environment”
Harolbio is the first innovative line of environment and worker’s friend lubricants, which optimizes the efficiency of production processes and reduces costs. The Harolbio project was studied by a group of Italian Universities and companies led by Bellini. The European Community funded 50% of the cost of development (€1.2M) as Harolbio was recognised as an innovative and purposeful project to improve working conditions of the metalworking industry.
Harolbio is formulated with vegetable base oils, raw materials from renewable and biodegradable sources, which are not harmful to the workers’ health and with no environmental impact. It is the revolution of the lubricant’s world, which has led to awareness towards environmental sustainability and worker’s health. Harolbio ensures better performance than mineral oils, and also compared to those based on traditional synthesis esters, which can show thermal-oxidative stability problems through time because of their chemical-physical characteristics.
FEATURES
- 100% vegetable origin
- Biodegradability > 90%
- Do not release harmful compounds in the air such as polycyclic aromatic hydrocarbons (PAH)
- Reduces the formation of oily mists
- No Exposure Limit Value – T.L.V. then total non-toxicity of the product
- High smoke point
- High flash point
- High EP performance
- High lubricity properites which reduce the friction coefficient by 30% with no EP additives
- Greater oxidation stability compared to conventional vegetable oils and unsaturated oils
- High performance at low prices not prone to oil price fluctuations.
WHY CHOOSING HAROLBIO
“With Harolbio you save money and you take care of your health.”
Choosing Harolbio means saving on both production and safety costs. Harolbio delivers a better performance than mineral oil, such as an improved lubrication and lower production costs. The consumption of electricity is also reduced by up to 3-4% and up to 7% for heavy-duty operations. Harolbio’s higher lubricity also lengthens the operating life of machining tools. In the aluminium processing, Harolbio reduces the costs connected to tools consumption by up to 40%; this figure increases to 80% in the machining of ferrous materials.
Products in the Harolbio Line are very resistant to evaporation. The low volatility reduces the cost of maintenance of the vacuum and filter systems. Harolbio has also a higher cutting power that allows obtaining better finishing surfaces than those using mineral oils. Another factor to consider is safety. Not containing mineral oils, Harolbio does not release potentially carcinogenic substances such as PAHs into the air.
FEATURES
- Reduction of electricity consumption up to 7%
- Increase of tool life up to 80%
- Reduction of the dimensional distortion of the pieces
- Reduction of the costs for Vacuum systems and filters
- It does not harm your health
- Reduction of the risk of slipping and accidents
- Reduction of the frequency of medical checks on operators
- Increase of productivity.
Products
Click on the product’s name to follow up :
HAROLBIO 0
It’s a very fluid neat cooling lubricant, free from mineral oil, formulated for lapping, smoothing, chip removal and grinding operations of ferrous and non-ferrous materials. It’s formulated with state of the art raw materials, consisting of wholly saturated synthetic esters, with additives to enhance cutting performance. It has a very high hygienic and environmental compatibility.
It provides:
- no smoke and vapours during the process;
- a high flashpoint for operations in complete safety;
- an excellent smoothness even at low temperatures and an exceptional wetting power, for which the oil disperses quickly and uniformly on the metallic surface;
- exceptional greasing, EP and detaching power, for high quality finishes;
- good resistance to oxidation and rust;
- good anti-wear power;
- low temperature of the processed pieces;
- well crushed and shredded scrap;
- outstanding anti-welding cutting power;
- complete biodegradability;
- maximum tolerance by the operators because it does not contain any harmful and irritant components.
The product is free from chlorinated and/or sulfur compounds, and it does not contain polycyclic aromatic hydrocarbons (PAHs)
Application
All the operations, also the severe ones, with both traditional jet lubrication systems and minimal spray lubrication systems, on ferrous and nonferrous metals, including titanium, when it’s required a product with a high degree of fluidity. Also suitable for high performance grinding operations of steels, in particular stainless steel, hard metals, graphites; excellent with all types of grinding wheels including those in CBN.
Data do not constitute any specification.
HAROLBIO 1
It’s a neat MWF, free from mineral oil, formulated for ferrous and non-ferrous metals removal operations.
It is made from state-of-the-art raw materials, based on saturated and synthetic esters, mixed with components, which improve machining and antioxidant, rust and metal passivators additives.
Features:
- neither fumes nor vapours while working;
- high flash point for safe operations;
- excellent fluidity even at low temperatures and exceptional wetting power, for a quick and an even spreading on metal surface;
- excellent greasing, EP, detaching and cutting power, for high quality finishes;
- good oxidation and rust resistance;
- buon potere antiusura;
- good anti-wear properties;
- low temperature of worked pieces;
- well crushed and shredded scrap;
- excellent cutting and anti-welding power;
- 100% biodegradability;
- friend to operators, because it does not contain either harmful or irritant components.
The product is free from chlorinated and sulfur compounds and does not contains Polycyclic Aromatic Hydrocarbons (PAHs).
Application
All metalworking operations, including heavy ones, of removal, cutting, buckling and bending with both systems of traditional jet lubrication and minimal spray ones, on ferrous and non-ferrous metals, including Titanium. The product can be used also for high performance grinding of steel, in particular stainless steel and hard metals; it performs excellent with all grinders types, included CBN.
Data do not constitute any specification.
HAROLBIO 1 FP
It’s a whole cooling lubricant, free from mineral oil, formulated for deep drilling operations of steels and alloy steels, as well as chip removal and grinding operations of ferrous metals. It’s based on last generation raw materials, consisting of synthetic and natural esters refined with an unique method, mixed with anti-welding EP (for Extreme Pressure) additives of active-inactive sulphide typology, zinc free anti-wears based on phosphorus compounds, antioxidants, antirust and metallic passivators, which guarantee exceptional performance by exerting a synergistic action with one another.
It provides:
- low smoke and vapour formation during the process;
- a high flashpoint for operations in complete safety;
- an excellent smoothness even at low temperatures and an exceptional wetting power, for which the oil disperses quickly and uniformly on the metallic surface;
- excellent greasing power;
- exceptional anti-welding, EP and detaching cutting power, for high quality finishes;
- good resistance to oxidation and rust;
- very high anti-wear power;
- low temperature of the processed pieces;
- well crushed and shredded scrap;
- complete biodegradability;
- maximum tolerability by the operators because it does not contain any harmful and irritant components.
The product is free from chlorinated compounds.
Application
All the operations, also the severe ones, of deep drilling (in particular, BTA), chip removal and cutting of steel, alloy steel, stainless steel and inconel.
All operations of grinding and whole grinding of alloyed steels and stainless steels.
Data do not constitute any specification.
HAROLBIO 1 P/PL
It’s a neat mwf, free from mineral oil, formulated for chip removal and grinding operations of steels and alloyed steels; it suitable for non-ferrous materials.
It is made of last generation raw materials, consisting of synthetic and natural esters refined with an unique method, mixed with anti-welding, EP (for Extreme Pressure) and anti-wear additives of active-inactive sulphide typology, zinc free anti-wears based on phosphorus compounds, antioxidants, antirust and metallic passivators, which guarantee exceptional performance by exerting a synergistic action with one another.
Features:
- no fumes and vapours while operating
- high flash point for operations in complete safety;
- an excellent smoothness even at low temperatures and an exceptional wetting power, for which the oil disperses quickly and uniformly on the metallic surface
- excellent greasing power, EP and detaching cutting power, for high quality finishes;
- good resistance to oxidation and rust;
- good anti-wear power;
- low temperature of the processed pieces;
- well crushed and shredded scrap;
- complete biodegradability;
- maximum tolerance by the operators because it does not contain any harmful and irritant components.
The product is free from chlorinated compounds.
Application
All operations, including heavy ones, of removal and cutting of steels, alloyed steels, stainless steels and inconel. Grinding, full-grinding of alloyed steels and stainless steels.
Data do not constitute any specification.
HAROLBIO 1 S EP
It’s a whole cooling lubricant, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous metals.
It’s based on last generation raw materials, such as synthetic and natural esters refined with an unique method, mixed with anti-welding EP (for Extreme Pressure) additives of active-inactive sulphide typology, zinc free anti-wears based on phosphorus compounds, antioxidants, antirust and metallic passivators, which guarantee exceptional performance by exerting a synergic action one each other.
It provides:
- low smoke and vapour formation during the process;
- a high flashpoint for operations in complete safety;
- an excellent smoothness even at low temperatures and an exceptional wetting power, for which the oil disperses quickly and uniformly on the metallic surface;
- ottimo potere untuosante;
- eccezionale potere antisaldante di taglio, EP e lubro-distaccante per finiture di altissima qualità;
- buona resistenza all’ossidazione ed alla ruggine;
- excellent greasing power;
- exceptional anti-welding, EP and detaching cutting power, for high quality finishes;
- good resistance to oxidation and rust;
- very high anti-wear power;
- low temperature of the processed pieces;
- well crushed and shredded scrap;
- complete biodegradability;
- maximum tolerance by the operators because it does not contain any harmful and irritant components.
The product is free from chlorinated compounds.
Application
All the removal and cutting operations, also the heavy ones, with both traditional jet lubrication systems and minimal spray lubrication systems, on aluminium, steels, alloy steels, stainless steel and inconel.
Data do not constitute any specification.
HAROLBIO 1 SI PLUS
It’s a neat MWF, free from mineral oil, made from a mixture of synthetic base, made of steric hindrance esters, strongly stable to hydrolysis and oxidation, and E.P. cutting additives, inactive sulphur agents, greasy agents, metallic passivators, stabilizing and anti-oxidant.
Features:
- strong cutting and anti-welding power;
- high resistance to volatilization, despite the high fluidity;
- excellent greasing and lubricant power, even at high temperatures;
- high refrigerant power;
- hygienic-sanitary compatibility, as it is free from toxic, harmful, sensitizer, irritating, toxic for the reproductive cycle, harmful for the environment components. For this reason, it is free from Chemical Risk according to D.lgs. 25/00 of 02/02/02 (periodic medical exam).
- nor fumes neither oil mists while working;
- very high flash point;
- very high-quality superficial finishing;
- long lasting tools, working speed and better progress compared to cutting mineral based oils.
Application
All metalworking operations of removal and cutting on ferrous materials, in particular hard, extra hard and stainless steels, Aluminium alloys and yellow alloys, where a very low viscosity is required.
It is free from solids and crust contents; it is a limpid, brown and biodegradable oil. It smells moderate and pleasant.
It is free from Chlorine, Zinc and PAHs (Polycyclic Aromatic Hydrocarbons).
Data do not constitute any specification.
HAROLBIO 2
It’s a whole cooling lubricant, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous metals.
It’s formulated with state of the art raw materials, consisting of natural synthetic esters refined with a unique method and mixed with antioxidant and antirust additives and metallic passivators.
Features:
- no formation of smoke and vapours during the process;
- a high flashpoint for operations in complete safety;
- an excellent smoothness even at low temperatures and an exceptional wetting power, for which the oil disperses quickly and uniformly on the metallic surface;
- excellent greasing power, EP and detaching cutting power, for high quality finishes;
- good resistance to oxidation and rust;
- good anti-wear power;
- low temperature of the processed pieces;
- well crushed and shredded scrap;
- complete biodegradability;
- maximum tolerance by the operators because it does not contain any harmful and irritant components.
The product is free from chlorinated and/or sulphorated compounds and it doesn’t contain aromatic polycyclic hydrocarbons (IPA).
Application
All the removal and cutting operations, also the heavy ones, with both traditional jet lubrication systems and minimal spray lubrication systems, on ferrous and non-ferrous materials, titanium included.
Data do not constitute any specification.
HAROLBIO 2 S EP
It’s formulated with state-of-the-art raw materials, consisting of:
- synthetic esters;
- natural esters refined with a unique method;
- antioxidant, antirust and metallic passivators additives;
- anti-welding and EP (Extreme Pressure) active-inactive sulphide based additives;
- zinc-free anti-wear phosphorus compounds;
- antioxidants, antirust and metallic passivators, which exert a synergistic.
Features:
- low formation of smoke and vapours during the process;
- a high flashpoint for operations in complete safety;
- an excellent smoothness even at low temperatures and an exceptional wetting power, for which the oil disperses quickly and uniformly on the metallic surface;
- excellent greasing power;
- exceptional anti-welding, EP and detaching cutting power, for high quality finishes;
- good resistance to oxidation and rust;
- very high anti-wear power;
- low temperature of the processed pieces;
- well crushed and shredded scrap;
- complete biodegradability;
- maximum tolerance by the operators because it does not contain any harmful and irritant components.
The product is free from chlorinated compounds.
Application
All the removal and cutting operations, also the heavy ones, with both traditional jet lubrication systems and minimal spray lubrication systems, on aluminium, steel, alloy steel, stainless steel and Inconel.
HAROLBIO 2 S EP is especially recommended for deep drilling operations with ejector, cannon and BTA systems.
Data do not constitute any specification.
HAROLBIO 2 SI PLUS
It’s a neat metalworkingfluid, free from mineral oil, formulated for chip removal operations of ferrous and non-ferrous metals.
It is made of state-of-the-art raw materials, refined with exclusive method, consisting of natural synthetic esters, in mixture with antioxidant, antirust and metallic passivators additives.
It assures:
- no smoke or vapours while working;
- high flash point for safe operations;
- excellent fluidity even at low temperatures and exceptional wetting power, for a quick and an even dispersion on the metal surface;
- superior oiling, EP, detaching and cutting power for high quality finishes;
- good oxidation and rust resistance;
- good anti-wear properties;
- low temperature of worked pieces;
- well crushed and shredded scrap;
- excellent cutting and anti-welding power;
- 100% biodegradability;
- maximum tolerability for operators because it does not contain either harmful or irritant components.
The product is free from chlorinated and sulfur compounds and does not contains Polycyclic Aromatic Hydrocarbons (PAHs).
Application
All metal-working operations, including heavy ones, of removal and cutting with both systems of traditional jet lubrication and minimal spray ones, on ferrous and non-ferrous materials, including titanium and yellow alloys.
Data do not constitute any specification.
HAROLBIO 3
It is a non-emulsifiable coolant, free of mineral oil, formulated for machining operations of ferrous and non-ferrous metals.
It is made from latest generation raw materials, made of synthesis and natural esters, refined with exclusive method, in mixture with anti-oxidant, anti-rust and metallic passivator additives.
It guarantees:
- Absence of fumes and vapours while operating;
- A high flash point for operations in complete safety;
- An excellent smoothness even at low temperatures and an exceptional wetting power, thanks to which the oil is dispersed on the metal surface quickly and uniformly;
- Superior oiling power, EP and lubro-detaching for quality finishes;
- Good resistance to oxidation and rust;
- Good anti-wear power;
- Low temperature of the pieces produced;
- Well crushed and shredded scrap;
- An excellent cutting anti-solding power
- 100% biodegradability
- Maximum tolerability by operators because it does not contain any harmful components or irritants.
The product is free of chlorinated compounds and / or sulfurs, and does not contains polycyclic aromatic hydrocarbons (PAHs).
Application
All operations, including heavy ones, removal and cutting, with both systems of traditional jet lubrication and minimal spray one, on ferrous and non-ferrous metals, including titanium.
Data do not constitute any specification.
HAROLBIO 3 SI PLUS
It is a non-emulsifiable coolant, free of mineral oil, formulated for machining operations of ferrous and non-ferrous metals.
It is made from latest generation raw materials, made of synthesis and natural esters, refined with exclusive method, in mixture with anti-oxidant, anti-rust and metallic passivator additives.
It guarantees:
- Absence of fumes and vapours while operating;
- A high flash point for operations in complete safety;
- An excellent smoothness even at low temperatures and an exceptional wetting power, thanks to which the oil is dispersed on the metal surface quickly and uniformly;
- Superior oiling power, EP and lubro-detaching for quality finishes;
- Good resistance to oxidation and rust;
- Good anti-wear power;
- Low temperature of the pieces produced;
- Well crushed and shredded scrap;
- An excellent cutting anti-solding power;
- 100% biodegradability;
- Maximum tolerability by operators because it does not contain any harmful components or irritants.
The product is free of chlorinated compounds and / or sulfurs.
Application
All operations, including heavy ones, removal and cutting, with both systems of traditional jet lubrication and minimal spray one, on ferrous and non-ferrous metals, including titanium.
Data do not constitute any specification.
HAROLBIO 5
It is a non-emulsifiable coolant, free of mineral oil, formulated for machining operations of ferrous and non-ferrous metals.
It consists of a mixture of natural oils, refined with a unique method, with antioxidant additives, rust and metal passivators.
It guarantees:
- Absence of fumes and vapours while operating;
- A high flash point for operations in complete safety;
- An excellent smoothness even at low temperatures and an exceptional wetting power, thanks to which the oil is dispersed on the metal surface quickly and uniformly;
- Superior oiling power, EP and lubro-detaching for quality finishes;
- Good resistance to oxidation and rust;
- Good anti-wear power;
- Low temperature of the pieces produced;
- Well crushed and shredded scrap;
- An excellent cutting anti-solding power;
- 100% biodegradability;
- Maximum tolerability by operators because it does not contain any harmful components or irritants.
The product is free of chlorinated compounds and / or sulfurs, and does not contains polycyclic aromatic hydrocarbons (PAHs).
Application
All operations, including heavy ones, removal and cutting, with both systems of traditional jet lubrication and minimal spray one, on ferrous and non-ferrous metals, including titanium.
In particular, HAROLBIO 5 can be used, with excellent results, in all gears production operations like slotting, toothing, broaching, shaving (exception in grinding, where HAROLBIO 1 is recommended).
Data do not constitute any specification.
HAROLBIO 5 CP
It is a non-emulsifiable coolant, free of mineral oil, formulated for machining operations of ferrous and non-ferrous metals.
It consists of a mixture of natural oils, refined with a unique method, with anti-welding E.P., antiwear and antioxidant additives, rust and metal passivators.
It guarantees:
- Absence of fumes and vapours while operating;
- A high flash point for operations in complete safety;
- An excellent smoothness even at low temperatures and an exceptional wetting power, thanks to which the oil is dispersed on the metal surface quickly and uniformly;
- Superior oiling power, EP and lubro-detaching for quality finishes;
- Good resistance to oxidation and rust;
- Good anti-wear power;
- Low temperature of the pieces produced;
- Well crushed and shredded scrap;
- An excellent cutting anti-solding power
- 100% biodegradability
- Maximum tolerability by operators because it does not contain any harmful components or irritants.
The product is free of chlorinated compounds.
Application
All operations, including heavy ones, removal and cutting, with both systems of traditional jet lubrication and minimal spray one, on ferrous and non-ferrous metals, including titanium.
Data do not constitute any specification.
HAROLBIO 5 SI PLUS
It is a non-emulsifiable coolant, free of mineral oil, formulated for machining operations of ferrous and non-ferrous metals.
It consists of a mixture of natural oils, refined with a unique method, with anti-welding E.P., antiwear and antioxidant additives, rust and metal passivators.
It guarantees:
- Absence of fumes and vapours while operating;
- A high flash point for operations in complete safety;
- An excellent smoothness even at low temperatures and an exceptional wetting power, thanks to which the oil is dispersed on the metal surface quickly and uniformly;
- Superior oiling power, EP and lubro-detaching for quality finishes;
- Good resistance to oxidation and rust;
- Good anti-wear power;
- Low temperature of the pieces produced;
- Well crushed and shredded scrap;
- An excellent cutting anti-solding power;
- 100% biodegradability;
- Maximum tolerability by operators because it does not contain any harmful components or irritants.
The product is free of chlorinated compounds.
Application
All operations, including heavy ones, removal and cutting, with both systems of traditional jet lubrication and minimal spray one, on ferrous and non-ferrous metals, including titanium.
Data do not constitute any specification.
HAROLBIO 5 FG
It is multi-function lubricant, free from mineral oil, formulated both as high greasing power lubricant and cooling metalworking fluid for removal, deformation and pressing operations of ferrous and non-ferrous metals.
It consists of a mixture of natural oils, refined with a unique method, with antioxidant additives, rust and metal passivator, which give to the product a very high thermic and oxidative stability.
HAROLBIO 5 FG has been approved in the food industry, in case of accidental food contact, according to the NSF:H1 specification.
It ensures:
- Absence of fumes and vapours while operating;
- A high flash point for operations in complete safety;
- An excellent smoothness even at low temperatures and an exceptional wetting power, thanks to which the oil is dispersed on the metal surface quickly and uniformly;
- Superior oiling power, EP and lubro-detaching for quality finishes;
- Good resistance to oxidation and rust;
- Good anti-wear power;
- Low temperature of the pieces produced;
- Well crushed and shredded scrap;
- An excellent cutting anti-welding power
- 100% biodegradability
- Maximum tolerability by operators because it does not contain any harmful or irritants components.
The product is free of chlorinated compounds and / or sulphurs, and does not contains Polycyclic Aromatic Hydrocarbons (PAHs).
Application
Multi-function lubricant oil.
A) As fluid in machining operations:
All operations, including heavy ones, removal and cutting, with both systems of traditional jet lubrication and minimal spray one, on ferrous and non-ferrous metals, including titanium.
In particular, HAROLBIO 5 FG can be used, with excellent results, in all gears production operations like slotting, toothing, broaching, shaving (exception in grinding, where HAROLBIO 1 is recommended).
It is particularly recommended for worked pieces used in the food industry..
B) As lubricant:
Circulating, splash, bath and oil mist lubrication systems, when a high greasing power with EP, anti-wear and anti-stick-slip properties product is required.
Data do not constitute any specification.
HAROLBIO SPRAY 100
Cutting oil for threaders, rolling, tapping, etc. free from mineral oil and made by a mixture of natural, highly refined and biodegradable oils.
Features
- Low odours and vapours, extraordinarily lower than normal tapping mineral oils;
- Excellent anti-weldind power;
- Excellent surface finishings;
- Maximum hygienic-sanitary-environmental compatibility;
- Minimal lubrication of mechanical kinematics.
Data do not constitute any specification.
HAROLBIO SPRAY SUPER EP
E’ un lubrificante sintetico, a base di poliglicoli, destinato a lubrificazione di ingranaggi, cuscinetti, supporti e cinematismi operanti ad elevata temperatura, anche sotto carichi gravosi. La base impiegata ed il tipo di additivazione antiossidante, antiusura, antiruggine ed anticorrosiva garantiscono una resistenza termico-ossidativa di un lungo periodo, in assenza di morchie e residui, pari almeno a due volte e mezzo quella di un normale olio minerale. Significativo è l’elevatissimo naturale indice di viscosità della base impiegata, che assicura limitate diminuzioni di viscosità in funzione delle temperature.
Applicazione
Catene di trasporto, scatole di ingranaggi, cuscinetti, accoppiamenti, ecc. operanti a temperature elevate (come riferimento comprese tra 80 e 120°C; nelle zone più calde del serbatoio si possono raggiungere anche punte di 200°C). Supera il livello prestazionale del 12° stadio nella proza FZG (DIN 51345).
I dati riportati non costituiscono specifica.
HAROLBIO WAY 100
It is a biodegradable lubricant, with a high viscosity index, for the lubrication of guides and slides. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam.
It guarantees:
- High viscosity index thanks to its high mechanical strength of the employed base, without addition of improving additives, for a constancy in performance even in extreme operating conditions;
- Very natural low pour point;
- Excellent protection against wear, corrosion, rust and foam;
- Great EP power and anti-stick-slip;
- Compatibility with all metals and their alloys used in normal machinery;
It is compatible with the best quality elastomers commonly available on the market such as:
- fluorinated rubber (for example Viton);
- PTFE (for example Teflon);
- acrylonitrile butadiene rubber (high nitrile): NBR-HNBR;
- fluorosilicone rubber;
- silicone rubber
or other rubbers still compatible with esters
Application
It is specially formulated for plants operating in severe conditions which require high performance biodegradable oils for low and very low temperatures and Extreme Operating pressures. Particularly suitable for machines working outdoors.
Performance levels
- FZG Test (DIN 51354): 13
- Vickers M 2950 S (35VQ25 pump)
- DIN 51524 Parte 2a HLP
- AFNOR E-48603 HM-HV
- Denison HF-0
- Cincinnati machine P-53
- French Siderurgy 173-151
Data do not constitute any specification.
HAROLBIO WAY 150
It is a biodegradable lubricant, with a high viscosity index, for the lubrication of guides and slides. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam.
It guarantees:
- High viscosity index thanks to its high mechanical strength of the employed base, without addition of improving additives, for a constancy in performance even in extreme operating conditions;
- Very natural low pour point;
- Excellent protection against wear, corrosion, rust and foam;
- Great EP power and anti-stick-slip;
- Compatibility with all metals and their alloys used in normal machinery;
- It is compatible with the best quality elastomers commonly available on the market such as:
- fluorinated rubber (for example Viton);
- PTFE (for example Teflon);
- acrylonitrile butadiene rubber (high nitrile): NBR-HNBR;
- fluorosilicone rubber;
- silicone rubber
or other rubbers still compatible with esters
Application
It is specially formulated for plants operating in severe conditions which require high performance biodegradable oils for low and very low temperatures and Extreme Operating pressures. Particularly suitable for machines working outdoors.
Performance levels
- FZG Test (DIN 51354): 13
- Vickers M 2950 S (35VQ25 pump)
- DIN 51524 Parte 2a HLP
- AFNOR E-48603 HM-HV
- Denison HF-0
- Cincinnati machine P-53
- French Siderurgy 173-15
Data do not constitute any specification.
HAROLBIO WAY 220
It is a biodegradable lubricant, with a high viscosity index, for the lubrication of guides and slides. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam.
It guarantees:
- High viscosity index thanks to its high mechanical strength of the employed base, without addition of improving additives, for a constancy in performance even in extreme operating conditions;
- Very natural low pour point;
- Excellent protection against wear, corrosion, rust and foam;
- Great EP power and anti-stick-slip;
- Compatibility with all metals and their alloys used in normal machinery;
It is compatible with the best quality elastomers commonly available on the market such as:
- fluorinated rubber (for example Viton);
- PTFE (for example Teflon);
- acrylonitrile butadiene rubber (high nitrile): NBR-HNBR;
- fluorosilicone rubber;
- silicone rubber
or other rubbers still compatible with esters
Application
It is specially formulated for plants operating in severe conditions which require high performance biodegradable oils for low and very low temperatures and Extreme Operating pressures. Particularly suitable for machines working outdoors.
Performance levels
- FZG Test (DIN 51354): 13
- Vickers M 2950 S (35VQ25 pump)
- DIN 51524 Part 2a HLP
- AFNOR E-48603 HM-HV
- Denison HF-0
- Cincinnati machine P-53
- French Siderurgy 173-151
Data do not constitute any specification.
HAROLBIO WAY 32
It is a biodegradable lubricant, with a high viscosity index, for the lubrication of guides and slides. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam.
It guarantees:
- High viscosity index thanks to its high mechanical strength of the employed base, without addition of improving additives, for a constancy in performance even in extreme operating conditions;
- Very natural low pour point;
- Excellent protection against wear, corrosion, rust and foam;
- Great EP power and anti-stick-slip;
- Compatibility with all metals and their alloys used in normal machinery;
It is compatible with the best quality elastomers commonly available on the market such as:
- fluorinated rubber (for example Viton);
- PTFE (for example Teflon);
- acrylonitrile butadiene rubber (high nitrile): NBR-HNBR;
- fluorosilicone rubber;
- silicone rubber
or other rubbers still compatible with esters
Application
It is specially formulated for plants operating in severe conditions which require high performance biodegradable oils for low and very low temperatures and Extreme Operating pressures. Particularly suitable for machines working outdoors.
Performance level
- FZG Test (DIN 51354): 13
- Vickers M 2950 S (35VQ25 pump)
- DIN 51524 Parte 2a HLP
- AFNOR E-48603 HM-HV
- Denison HF-0
- Cincinnati machine P-53
- French Siderurgy 173-151
Data do not constitute any specification.
HAROLBIO WAY 46
It is a biodegradable lubricant, with a high viscosity index, for the lubrication of guides and slides. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam.
It guarantees:
- High viscosity index thanks to its high mechanical strength of the employed base, without addition of improving additives, for a constancy in performance even in extreme operating conditions;
- Very natural low pour point;
- Excellent protection against wear, corrosion, rust and foam;
- Great EP power and anti-stick-slip;
- Compatibility with all metals and their alloys used in normal machinery;
It is compatible with the best quality elastomers commonly available on the market such as:
- fluorinated rubber (for example Viton);
- PTFE (for example Teflon);
- acrylonitrile butadiene rubber (high nitrile): NBR-HNBR;
- fluorosilicone rubber;
- silicone rubber
or other rubbers still compatible with esters
Application
It is specially formulated for plants operating in severe conditions which require high performance biodegradable oils for low and very low temperatures and Extreme Operating pressures. Particularly suitable for machines working outdoors.
Performance levels
- FZG Test (DIN 51354): 13
- Vickers M 2950 S (35VQ25 pump)
- DIN 51524 Part 2° HLP
- AFNOR E-48603 HM-HV
- Denison HF-0
- Cincinnati machine P-53
- French Siderurgy 173-151
Data do not constitute any specification.
HAROLBIO WAY 68
It is a biodegradable lubricant, with a high viscosity index, for the lubrication of guides and slides. It is formulated with particular esters of natural origin and with a neat package of ashless additives against wear, oxidation, rust and foam.
It guarantees:
- High viscosity index thanks to its high mechanical strength of the employed base, without addition of improving additives, for a constancy in performance even in extreme operating conditions;
- Very natural low pour point;
- Excellent protection against wear, corrosion, rust and foam;
- Great EP power and anti-stick-slip;
- Compatibility with all metals and their alloys used in normal machinery;
It is compatible with the best quality elastomers commonly available on the market such as:
- fluorinated rubber (for example Viton);
- PTFE (for example Teflon);
- acrylonitrile butadiene rubber (high nitrile): NBR-HNBR;
- fluorosilicone rubber;
- silicone rubber or other rubbers still compatible with esters
Application
It is specially formulated for plants operating in severe conditions which require high performance biodegradable oils for low and very low temperatures and Extreme Operating pressures. Particularly suitable for machines working outdoors.
Performance levels
- FZG Test (DIN 51354): 13
- Vickers M 2950 S (35VQ25 pump)
- DIN 51524 Parte 2a HLP
- AFNOR E-48603 HM-HV
- Denison HF-0
- Cincinnati machine P-53
- French Siderurgy 173-151
Data do not constitute any specification.
